Cabinet and chassis
Assembled Standard Network Cabinets Rack
Product Introduction
Technical Parameter

Product application:

Network Rack applied to the centralized management locations of the wiring equipments and the network transmission equipments of the distribution room, the equipment room, the computer room of the network center, the data center, etc. and is taken in the facilities of common weak current integrated units, with wide scope of application.


Application standard:

ANST/EIA RS-310-D 、IEC60297-2 、DIN41494 PANTI 、 GB/T3047.2-9


Product Features:

1. Fabricated from the high-strength cold-rolled steel sheets, with reasonable and firm structure.
2. Featured with noble and elegant appearance, exquisite workmanship and precision dimensions and is full of spirit of the times.
3. Rapid assembling/disassembling structure and reasonable line channel.
4. The international popular front and back doors with arc hexagonal meshes (glass) is taken, therefore, the standard network cabinet has extremely high ventilation rate and extremely high heat dissipation capability.
5. The strip for high-strength bearing square hole is taken, with U position sign; therefore, the depth can be adjusted accurately, and installation and maintenance can be implemented conveniently.
6. The base can be equipped optionally in order to implement the requirements of fixing the cabinet and the bottom line, blowing the cold air to the bottom and preventing mouse.
7. The grounding device is reserved for the cabinet; therefore, the using requirements of the computer room can be satisfied.

Air Fan

600、800 deep

2 set digitsInstallatiostandard parts

Over 1000 deep

4set

 

Below 1.6 meter

1set

Tray

1.6meter

2set

 

Over 1.8meter

3set

Casters and brackets

Each four

Installation standard parts

20/40set

PDU

1 set of 6-bit power socket

24 hours hotline
400-6901810
Customer service
Sales Hotline:400 690 1810
Product Selection
Solution
Service
About POTEL
Copyrights POTEL CABLE GROUP 赣ICP备14000568号-1 Jijintechwebsite