Jumper
Fiber Optical Data Transmission MPO/MPO Patch Cord for Optical CATV
MPO does not have female of introducing needle
MPO has male of introducing needle
Multimode soft optical cable
Product Introduction
Technical Parameter

Product application:

The MPO-MPO optical fiber patch cord is mainly applied to the main computer room for high-speed equipment. The MPO-MPO optical fiber patch cord adopting the parallel 4TX and 4RX channels meets the standard of QSFP+SR4 4*10Gb interface and is applied to transmission and connection of 40Gb (QSFP). Moreover, the MPO-MPO optical fiber patch cord adopting the parallel 10TX and 10RX channels meets the standard of CXP+SR10 10*10Gb interface and is applied to transmission and connection of 100Gb (CXP).


Application standard:

IEC 60332-3C、IEC 60754-2、IEC 61034-2


Product Features:

1. The OM3 and OM4 multimode optical fibers can be selected in accordance with the different configuration requirements of the users.
2. The bending radius of the smaller trunk optical fiber is carried out due to the novel round and special structure with small external diameter; thus, the patch cord can be stored and laid conveniently and quickly.

Performances of the connector

Connector model

Insertion loss (average value)

Insertion loss (maximum)

Return loss

40G transmission MPO (MM)

0.10dB

0.30dB

N/A

100G transmission MPO (MM)

0.30dB

0.50dB

N/A

Transmission performances of optical fiber:

Model of optical fiber

OM3 50/125um

OM4 50/125um

(850/1300nm)

(850/1300nm)

Peak attenuation (dB/KM)

2.5 / 0.7

2.5 / 0.7

Minimum EMB bandwidth (MHz.KM)

2000/-

4700/-

Variation of attenuation; radius: 7.5mm; optical fiber of 250um coating, 850nm

< 0.2dB

< 0.2dB

24 hours hotline
400-6901810
Customer service
Sales Hotline:400 690 1810
Product Selection
Solution
Service
About POTEL
Copyrights POTEL CABLE GROUP 赣ICP备14000568号-1 Jijintechwebsite